Different types of Building Insulation

Building Insulation:


What is Building Insulation:

Insulation according to elementary physics is a non-conductor that forms a bridge or barrier, to hold down the transfer of an element such as electricity or heat in this case. Building insulation. Therefore, is the use of barriers to insulate a building that reduces heat loss or heat gain by providing a barrier between the inside of your home and the significantly different temperature outside.

Building insulation is a process that helps in heat management, concrete walls are a little harder to insulate but it can be done. According to Wikipedia building Insulation refers to any object in a building used as insulation for thermal management. While the majority of insulation in buildings is for thermal purposes, the term also applies to acoustic insulation, fire insulation, and impact insulation (e.g. for vibrations caused by industrial applications).

What are the Different Types of Building Insulation:

There are a lot of building insulation types and each one of them is specific for particular building locations like the foundation, attic, and walls.

The different types of building insulation include:

  1. Blanket: (Batts and rolls) this kind of Insulation requires the following materials to be done Fiberglass, Mineral (rock or slag) wool, plastic fibers, Natural fibers. it is applicable in the following places unfinished walls, including foundation walls, floors, and ceilings.                          The advantage of this type of Insulation is that it can be done perfectly (DIY) by non-professionals, it is Inexpensive and Particularly suited for standard studs and jousting spaces.
  2. Concrete Block Insulation: Materials required for this insulation includes Foamboard, to be placed on outside of the wall (usually new construction) or inside of the wall (existing homes): Some manufacturers incorporate foam beads or air into the concrete mix to increase R-values. areas where applicable include the following Unfinished walls, including foundation walls, New construction, or major renovations, Walls (insulating concrete blocks).
  3. Loose-fill and blown-in: This grade of Building insulation is done in an enclosed existing wall or open new wall cavities, unfinished attic floors, Other hard-to-reach places. Loose-Fill and blown-in insulation is blown into place using special equipment and, although not recommended, sometimes poured in. one of the glaring advantages of this technique is that it Is good for adding insulation to existing finished areas.
  4. Structural insulated panels (SIPs): This technique is also used in unfinished walls, ceilings, floors, and roofs for new construction structural insulated panel-built houses provide superior and uniform insulation compared to more traditional construction methods; they also take less time to build.

These Different Insulation Patterns all aim at one purpose to reduce the heat level in buildings. If you are looking to reduce the level of heat or you live in a heat-intensified area. Building insulation is a possible option to consider. with this option, in place, normal temperature levels in the home office building or mall are maintained.

Professional input: Fixing insulators in a building is best done by professionals, even though (DIY) do-it-yourself techniques abound on the internet, we advise that you employ professional help in doing this so as to achieve optimal satisfaction and result.


read up on our previous posts here >


Leave a Comment

Your email address will not be published. Required fields are marked *